进口蜗轮浆液阀（德国奥莱斯阀门品牌）

进口蜗轮浆液阀(德国奥莱斯阀门品牌)

【进口蜗轮浆液阀】详细说明:

液阀又名无凹槽浆液阀，整体式浆液阀，阀体密封采用“O"型复合密封圈结构，克服了原对夹式浆液阀采用“U"型密封垫受力后易移位和变形，介质外泄等缺点。闸板采用刀形结构，解决了灰浆沉淀密封槽内，阀门关闭不严，外泄漏等问题。 采用全圆形的通道设计，在刀板上端安装有聚四氟乙烯、刮泥器，聚胶脂或含Ni耐磨铸铁制成的耐磨折边锥体安装在刀闸阀的进口端，可在阀体四周设置多个冲洗口。刀板底端加工成刀刃，光洁度高，保证了良好的密封性。

Fluid valve is also known as grooveless slurry valve, integral slurry valve. The valve body seal adopts "O" type compound seal ring structure, which overcomes the shortcomings of "U" type seal gasket, which is easy to displace and deform, medium leakage and so on. The gate adopts a knife-shaped structure, which solves the problems of improper closure and leakage of the valve in the slurry sedimentation sealing groove. A fully circular channel design is adopted, and a PTFE and a mud scraper are installed at the upper end of the cutter plate. The wear-resistant flange cone made of polyester resin or Ni-containing wear-resistant cast iron is installed at the inlet end of the cutter gate valve, and a plurality of flushing ports can be arranged around the valve body. The bottom end of the cutter plate is machined into a cutting edge, which has high smoothness and ensures good sealing performance.

【进口蜗轮浆液阀】特点：

 一体式浆液阀主要由阀体、O型圈、闸板、阀杆、支架等部件组成。

1.采用对夹一体式结构，体积小，重量轻；

2.*敞开的通道，可以防止介质在阀内的沉积；

3.采用可更换式密封结构，一改普通浆液阀与刀型闸阀维修难的问题；

4.阀体材质由传统的铸钢更换成了球墨铸铁，耐腐蚀性更好，有效延长了使用寿命

【进口蜗轮浆液阀】结构说明：

浆液阀分对夹式和整体式，对夹式阀体密封采用复合材料配置的“U”型和“T”型复合结构。整体式阀体密封采用“O”型复合密封圈结构，克服了原对夹式浆液阀采用“U”型密封垫受力后易移位和变形，介质外泄等缺点。闸板采用刀形结构，解决了灰浆沉淀密封槽内，阀门关闭不严，外泄漏等问题。

【进口蜗轮浆液阀】应用：

适用于矿山电厂的选煤、排渣、城市污水处理、食品、造纸、医药、石油、化工等油品、水、蒸汽管路上，接通或截断管路中的水泥浆、金矿粉、矿砂、炉渣、煤泥、纸浆、木浆、尾矿、纤维、粉尘、化学品处理污水、沉淀池、沥青、料仓出口、水果、谷物、屠宰厂废水等介质。